McFeely's 2024 Catalog - Catalog - Page 90
Fasteners
DIY
Gorilla Gripper ®
A
Easily grip, lift, and carry sheet goods!
This newer Model-GP Gorilla Gripper grabs panels from ZERO to 3/4 of an inch thick. Just like
the Gorilla Gripper Contractor Model, the Model GP makes light work of grabbing panels and
sheet goods. Now, the newer GP-model can grab panels down to zero thickness. Use it for 1/4”
plywood sheet metal, or thicker panels like 3/4” plywood. Use it to carry one or more plywood
panels from 0” to 3/4” total thickness. Pull sheet goods off a rack with ease. Grab sharp
edged sheet metal or glass panels safely. No cut hands! No awkward bending or twisting.
Improves jobsite safety and reduces worksite injuries. The Gorilla Gripper’s soft pads allow
for transport of furniture-grade panels without marring the surface.
A
Tools
Part #
Description
GGR-44009
Zero Grip Gorilla Gripper
FastCap Crown Clips
Price
$49.99
B
Hang crown molding without a helper!
Tool Accessories
Now you can install crown molding without the need for an army of helpers. FastCap’s Crown
Clips are lightly fastened to the wall using drywall screws, with the hook positioned slightly
lower than the installed bottom edge of the molding. The crown molding is then laid in the
hook and supported while the molding is nailed. The clip is removed before the molding is
nailed by simply sliding it to the right about 3/4” and popping it over the screw head. Crown
Clips are completely reusable. Hangers are approximately 3-1/2” H x 1-1/4” W x 9/16” D deep.
Hangers may be located up to 48” apart but best if one hanger is used for every 36” of
length. Imported.
Part #
FSC-3026-4
Leg-Up
Cabinet Mfg
Hardware
B
Description
Price
FastCap Crown Clips, 4 Pk
$6.64
C
Did you ever need a third arm?
Every time you try to cut sheet goods on your table saw, you need help to get the panel into
position. Now with the Leg-Up, you’ve got it all by yourself. The Leg-Up attaches to the edge
of your table saw or fence rail in minutes. It uses leverage, not your muscles, to lift the load.
Simply slide the edge of the panel into the hook groove and flip it up horizontally with ease.
Made of powder-coated and black-oxide-coated steel, the Leg-Up resists corrosion. Leg-Up
attaches to almost any table saw using the included bolts. An additional fitting is supplied,
giving you the option to mount it to the vertical edge of the table saw or the horizontal edge
of the fence rail. Few table saws are without a lip where you can mount the Leg-Up. It weighs
2.5 lbs. and measures 29-1/2” H x 2” D x 1-1/2” W.
Part #
GGR-0008
Description
Leg-Up Panel Lift
Lighted Pickup Flex Tool
Price
$44.95
D
Safety
See what you’re missing
This 24” lighted, mechanical pickup tool can grab anything, provided it’s within 52 cm (about
2”) or less. Features a strong retrieval claw, Flexi-Shaft™ with corrosion-resistant, black
finish, powerful LED light and comfortable hand controls. The only thing that would make
this tool better is if it were robotically fused onto your hand. Three LR41 batteries included.
Imported.
Part #
C
Description
Lighted Pickup Flex Tool
Storage
GT-7039
Index
D
89
Pricing is subject to change at any time due to market fluctuations.
Price
$15.89
