McFeely's 2024 Catalog - Catalog - Page 158
Fasteners
SHOP ESSENTIALS
FastCap® Saw Hood and Clamp
A
Keep sawdust under control and save valuable cleanup time!
FastCap’s® ChopShop Saw Hood catches the dust before it blows all over your workspace.
The hood also acts as a great shelter for your tools in inclement weather. The Saw Hood was
designed for miter saws but can also be used with tile or even lathe saws. Attach the hood
to the saw by running the roll pipe of the hood into the accessory holes on the saw. Once
attached, the hood unrolls to fall into position. Place some type of receptacle at the base of
the hood to collect the dust. Use the tile clamp if your saw does not have accessory holes
for mounting. Hood may also be mounted to a table, mounting holes at the base will accept
standard wood screws. Made of heavy-duty, water-resistant, commercial-grade nylon. Weighs
approximately 13 lbs. Dimensions when set up are 42” W x 31” H x 30” D. Imported.
Tools
Part #
Miter saw and
stand not included
A
Description
Price
156092
FastCap ChopShop Saw Hood
$188.87
156093
FastCap Clamp (Pair)
$26.56
Adjustable Glides
B
Hex nut makes adjustment easy
Tool Accessories
Leveling up furniture, appliances or even shop equipment is a lot simpler when there is an
easy way to make the adjustment (lifting the item a few inches off the floor while trying to
spin the glide is not our idea of easy!). This glide has a hex nut built right onto the shaft so
the adjustment is a simple matter of using the correct wrench. Available with a 1” x 1” black
nylon glide. The glide has 5/16”-18 threaded studs. Imported.
Part #
SHW-1503
C
B
Description
Price
1-3/8 Adjustable Glides
$3.99
Heavy-Duty Leg Adjuster
C
Holds 2,000 lb. - ideal for shop use!
Cabinet Mfg
Hardware
Unfortunately, most woodworkers do not have the luxury of a shop with a level floor. This
innovative adjustable leg leveler is just the thing to make your shop tools, benches and
worktables level without having to use shims. The 3” L x 3/8”-dia. bolt has a hex recess in
the end to allow for adjustment under load. The mounting plate measures 2-1/8” W x 2-1/16”
H, and the nylon covered foot is approximately 1-1/4” dia. Imported.
Part #
SHW-1501
FastCap® Super Mag
Description
Price
Heavy-Duty Leg Leveler
$7.45
D
Put things in their place!
Safety
D
Are you always working around your design plans? Get them out of the way of your work
but close enough to use with the Ultimate Magnet. At 1.7” across and with a 1.5” handle,
you can post your plans, parts list, drawings, or pictures of loved ones to any ferrous metal
surface. The extra long handle ensures that you can pull these six neodymium magnets away
from the metal surface when its time to put them away. Magnets are encased in a soft nonmarring plastic to protect your plans and the metal surface.
Part #
Description
Price
FSC-6045
Super Mag
$14.62
FastCap® Outlet Stamp
Storage
E
E
Accurately marks the back of a cabinet for electrical outlets. Plugs into the outlet and makes
four exact marks, outlining the outlet’s four corners. Works for both single and double gang
boxes. Also marks the outline for the Electrical Trim Ring.
Part #
Description
Price
FSC-2724
Outlet Stamp
$26.56
The Cable Wraptor™
F
Index
Are you tired of power-tool cords sprawling all over your shop? Make those unruly cords
submit with the Cable Wraptor™ This cable wrap has a large hanghole, T-shaped carrying
handle, easy-release trigger, large securing teeth, cable tie looping hole and stainless steel
hinge: 2” wrap holds up to 50 lb.; 3” holds 100 lb.; 4” holds up to 150 lb. Red and black.
Imported.
F
157
Part #
Description
Price
213171
Cable Wraptor™ 1”
$2.50
177496
Cable Wraptor™ 2”
$2.80
177497
Cable Wraptor™ 3”
$4.84
177498
Cable Wraptor™ 4”
$7.19
Pricing is subject to change at any time due to market fluctuations.
