McFeely's 2024 Catalog - Catalog - Page 139
JIGS, GUIDES & FEATHERBOARDS
Fasteners
BaseCoper Base Molding Guide
F
Base coping made easy
EasyCoper Tool Co. Inc. has done it again! Only this time, you can cut baseboards, not crown
molding, with the BaseCoper. Simply miter the baseboard in the normal manner. Place
the BaseCoper on top of the baseboard, allowing the molding to be visible through the
opening of the BaseCoper. Secure the BaseCoper to the work piece with a clamp. Extend the
BaseCoper beyond the edge of the work surface and use your jig saw and the Bosch T1190BO
(Part # RBB-B119) blade to follow the profile of the molding. The BaseCoper provides a flat
surface for your jig saw to ride on and keeps it at the correct angle. For baseboards taller
than 5-1/2”. you will need to shift the BaseCoper from one side to the other to complete the
full height of the baseboard. A larger clamp may also be necessary.
Description
Price
BaseCoper
$22.75
General® Crown King
F
G
Part #
Description
GT-880
Crown Molding Jig
Tool Accessories
Make perfect crown molding miter joints - the easy way! The General Tools® Crown King
eliminates difficult angle calculations, back cuts, auxiliary fences and coping of joints. It
is supplied with a 45° spring angle, plus an adapter for 52° and 38° spring angles. Easily
cuts perfectly mitered interior and exterior corner joints. Start by measuring the interior or
exterior angle. Adjust your miter saw to ONE HALF of the measured angle using a precision
sliding T-Bevel for best precision. Try using the General Tools® Sliding Digital T-Bevel, part #
GT-828. Place the crown molding wood into the appropriate interior or exterior portion of the
jig according to General Tool’s® instructions and make your miter cut. PERFECT AND EASY!
Imported.
Anthony’s Hinge Jig
Tools
Part #
ETC-0088
G
Price
$29.99
H
Part #
FSC-HINGE-JIG
NEW!
Description
Price
Anthony’s Hinge Jig
$6.60
Cabinet Mfg
Hardware
Developed by a cabinet maker, Anthony’s Hinge Jig is a great tool that helps install hinge
hardware to Euro Style cabinets.The Hinge Jig locates the center line for a hinge. It mounts
easily into the 5 mm holes and uses the cursor to draw a center line. If cabinets don’t have a
5 mm hole, use pins and align them along the edge of the cabinet, drill with a 5 mm driver
bit in the drill guides, and repeat the steps for finding the center line.
Features:
• Two pins fit in 5 mm holes in a 32 mm cabinet system
• To 5 mm drill guides to drill holes in a 32 mm cabinet system
• Locates center line for drilling hinge cup
H
Safety
Storage
Index
Questions? Email us at tech@McFeelys.com | Need more info? Call us at 1-800-443-7937.
138
