McFeely's 2024 Catalog - Catalog - Page 138
Fasteners
JIGS, GUIDES & FEATHERBOARDS
Kreg® Crown-Pro™
A
For crown molding up to 5-1/2” wide
Creating your own crown molding has always been a huge burden for even the most
experienced do-it-yourselfer. The Kreg® Crown-Pro™ simplifies the process by eliminating
coping altogether. It adjusts for any spring angle between 30º and 60º and works with crown
molding up to 5-1/2” W and comes complete with an angle finder for accuracy.
A
Part #
Description
Price
KRT-2800
Crown-Pro™
$32.99
Kreg® Square-Cut™
B
Tools
Make perfect, consistent square cuts
Tool Accessories
When you use a circular saw to cut boards to length, you no doubt have a tough time
accurately aligning the saw blade to your pencil mark. Which means each board isn’t always
the exact same length. Thanks to the Square-Cut™, it’s easy to achieve perfect square
cuts and consistent lengths every time! Adjustable guide arm locks in place for accurate
registration to the cutline every time. Works with material up to 12” W. Features a roof pitch
layout feature, nonslip rubber feet, and impact resistant plastic construction.
B
Part #
Description
Price
KRT-2600
Square-Cut™
$12.00
Kreg® Featherboard
C
The Kreg® True-FLEX™ featherboard design provides just the right amount of pressure to
the work piece. The wedge lock system allows the featherboard to be secured to a variety
of shop tools without additional hardware. Made of durable plastic, they are available as a
single or double pack.
Part #
KRT-3010
Description
Qty
True-FLEX™ Featherboard
(1) Each
$21.99
2-Pack
$39.99
Cabinet Mfg
Hardware
KRT-3020
Kreg® Cabinet Hardware Jig
Price
D
Makes knob and handle installation a breeze
Nothing detracts from a set of cabinets faster than handles that seem to be randomly placed
on the doors and drawer fronts. This adjustable edge guide jig makes it easy to accurately
install handles and knobs, regardless of size and style. Made of virtually indestructible plastic
with hardened steel guides to ensure straight holes. Includes: 1 Jig Base, 1 Edge Guide, 2
Drill Guides with knurled nuts, 2 Non-slip pads, 2 T-knobs and bolts, and 1 Owner’s Manual
with complete instructions. Note: A 3/16” (5 mm) drill bit is required, but not included. Made
in USA.
C
Part #
Safety
KT-6637
Description
Price
Kreg Drawer and Door Hardware Jig
EasyCoper Crown Molding Guide
$29.99
E
Use your jigsaw to cope crown!
Storage
D
The old saying, “Measure twice and cut once!” really applies to installing crown molding, and
the coping angle can make all the difference between a perfect fit the first time and a lot
of “adjustment time” with a wood rasp. The patented EasyCoper really simplifies the task of
coping crown molding. Even your first attempt will be nearly perfect!
EasyCoper consists of right-hand and left-hand guide plates that are screwed to a work
surface, slightly overhanging the edge. (Tip: Attach them as a pair to a board that you can
clamp to a portable workbench.) After mitering the end of the molding, place the crown in
the guide, face up. Then use your jig saw like a coping saw to remove the waste material by
following the molding profile exposed by the miter cut. The large flat end surface is beveled
so that you can follow the profile at the perfect relief angle. There is plenty of visibility so
it’s easy to do. EasyCoper is designed to cope crown moldings with a 52/38º spring angle,
the most common, but includes instruction for use with 45º crown as well. It works with
crown up to 5-1/2” wide. EasyCoper works best with a fine-tooth, narrow blade, such as a
Bosch T1190BO (Part # RBB-B119). Made of durable plastic. View a demonstration video at
McFeelys.com/easycoper.
Part #
ETC-0055
Description
EasyCoper™ Crown Molding Guide
Index
E
137
Pricing is subject to change at any time due to market fluctuations.
Price
$46.75
