McFeely's 2024 Catalog - Catalog - Page 118
Fasteners
CMT SAW BLADES
CMT Saw Blades
A
Tools
A
The contractor blades are ideal for miter, table and handheld saws because their narrow
kerf causes less drag on the motor. They can be used for framing, decking and general
construction. Great for ripping soft or hard wood, plywood and OSB sheets. The 10 pack is
an economical way to buy blades you will use everyday on the jobsite. When using a jobsite,
table saw or stationary table saw, you’ll need carbide-tipped ripping blade CM-K024-12 for
best results. It can be used on soft or hard woods. For greater versatility try CM-K040-12
for both crosscutting and ripping even in plywood with a mitre or table saws. With 40 teeth,
you’ll get a bit rougher edge than with the CM-K060 blades. Try CM-K060-12, if you need a
smoother finish; with 60 teeth there will be less splintering on your crosscuts. For use on a
portable benchtop, a miter, or a table saw in both hard and soft wood as well as plywood.
Imported.
This contractor pack of 10 is ideal for portable and cordless saws.
Use for:
Softwood, hardwood, plywood
Part #
Diameter Arbor Kerf Teeth
Tooth Type
Plate
Hook
Angle
Price
Use on soft- or hardwood, plywood & OSB
CM-024-07
7-1/4”
CM-040-07
ATB (Alternating Top Bevel) .047”
20º
$65.65
5/8” 0.071” 40 ATB (Alternating Top Bevel) .047”
5/8” 0.071”
24
12º
$72.50
15º
$8.96
Tool Accessories
For ripping wood with small handheld cordless saws
CM-K02406
Use for:
Ripping wood with handheld saws
6-1/2”
5/8” 0.071”
24
ATB (Alternating Top Bevel) .047”
For ripping wood with benchtop & table saws
CM-K024-12
12”
1”
0.102” 24
ATB (Alternating Top Bevel) .071”
$20.86
For crosscutting wood with portable benchtop & table saws
CM-K04008
8-1/4”
CM-K040-12
12”
5/8” 0.071” 40 ATB (Alternating Top Bevel) .047”
1”
0.102” 40 ATB (Alternating Top Bevel) .071”
12º
$12.22
15º
$22.30
For finish crosscuts & the occasional rip using portable, benchtop & table saws
Cabinet Mfg
Hardware
Use for:
Ripping wood with benchtop
and table saws
CM-K060-12
12”
1”
0.102” 60 ATB (Alternating Top Bevel) .071”
15º
$26.57
CM-K06014
14”
1”
0.126” 60 ATB (Alternating Top Bevel) .087”
15º
$38.22
CMT ITK Fine Cut-Off Blades
B
These blades are also excellent for crosscuts in soft and hard wood and plywood. They can
be used for an occasional rip cut as well. Designed for use on miter saws, table saws and
radial arm saws. Imported.
Part #
Diameter Arbor
CM-252-10
10”
Kerf Teeth
Safety
$52.71
C
Arbor
Kerf
Teeth
Tooth Type
Hook
Angle
CM-221-10
10”
5/8”
0.126”
60
TCG/FTG
10º
CM-0221-12
12”
1”
0.126”
72
TCG/FTG
10º
$95.53
30 mm 0.126”
80
TCG (triple chip grinder)
10º
$86.65
250 mm
B
Storage
15º
Price
Diameter
CM-0281-10M
Index
Hook
Angle
Industrial cabinet shops need a heavy-duty blade for a perfect finish on single-sided
laminate panels. Get excellent crosscuts with table saws, radial arm saws and miter saws
with the orange coating 10” blade. Use on chipboard, MDF, laminates, plywood, or hard
woods. 10” and 12 tooth configuration is triple chip grind (TCG) and have a plate thickness of
.087.” The 250 mm bladed has a 2.2 mm plate thickness. Imported.
Part #
C
117
Plate
5/8” 0.098” 60 ATB (Alternating Top Bevel) .071”
CMT Cabinet Shop Blades
Use for:
Finish crosscuts and rip with portable,
bencto, and table saws
Tooth Type
Pricing is subject to change at any time due to market fluctuations.
Price
$61.15
