McFeely's 2024 Catalog - Catalog - Page 114
Fasteners
FREUD® CARBIDE-TIPPED SAW BLADES
Freud® Box Joint Cutter Set
A
Box joints made simple!
Leave it to Freud® to design a blade set that makes cutting the popular box joint almost
trivial. One of the major problems when using a standard blade or dado-set for box joints is the
small (or not-so-small, depending upon the blade) nick at the corner of each pin. It is formed
by the beveled scoring tooth present on most dado-set outside blades and on all alternate
top bevel ground blades. Freud’s® Box Joint Cutter Set has perfectly flat top ground teeth,
eliminating this aggravation. The set is designed to cut perfect 1/4” or 3/8” joints without shims
or adjustments. Just reverse the blades to change joint width. Freud even includes complete
instructions for construction of a box joint jig. Imported.
Part #
Tools
A
Description
SD-3968
Price
8” Box Joint Cutter Set (5/8” Arbor)
Freud® Dial-a-Width Dado Set
$95.61
B
Tool Accessories
Hassle-free joints every time!
Freud’s Dial-a-Width Dado Set makes paper-tight joints a reality for everyone, without the
hassle of shims! Its patented technology uses a set of special hubs on the outside cutters
which, when stacked together or with any of the chippers, allows continuous adjustment
of dado width from 1/4” to 13/16”. Detents on the hubs provide for 0.004” fixed increments,
making it easy to return to a previous width. The Dial-a-Width Dado fits both right and left tilt
saws, and it’s easily converted from the factory supplied right tilt arbor configuration. Each
carbide tipped outside blade has 12 scoring and 12 flat-top ground teeth, set at a negative
12º hook for best performance in veneered products. Four 1/8”-wide chippers and one 3/32”
wide chipper all have four flat-top ground teeth set at a negative 12º hook. When set up for its
widest cut, this dado set consumes approximately 1-1/8” of arbor shaft, without allowance for
the arbor nut. Comes with a special arbor nut wrench to assist in reaching into the dado hub.
Imported.
B
Part #
Description
SD-0608
Price
8” Dial-a-Width Dado
Freud® Super Dado
$292.13
C
Cabinet Mfg
Hardware
Makes dadoes easy!
Freud’s Super Dado uses chippers with four teeth each instead of the standard two, so dado
bottoms are super smooth. Anti-kickback technology lets you feed at a controlled rate and
helps prevent climbing when used on a radial arm saw. An extra-stiff saw plate increases
dado accuracy. The Super Dado also includes a 3/32” chipper, making exact setups easy and
providing a 1/4” to 29/32” range. Dado shims are included. Imagine dadoes so clean and tight it
will be a shame to hide them! Imported.
C
Part #
Description
SD-0508
Price
8” Super Dado (5/8” Arbor)
$236.25
Freud® Radial Arm and Miter Saw Blades
D
Safety
LU91 sliding miter saw blade
D
Sliding compound miter saws can make glass smooth complex cuts with the right blade. Put on
any old blade and a hatchet could do almost as well. Freud uses a negative hook to help keep
the material pushed back against the fence and reduce climbing. Ideal for radial arm saws with
an alternate top bevel grind, –5º hook, .090” kerf, .071” plate. Imported.
Diameter
Arbor
Teeth
Tooth Type
LU91-10R
Part #
10”
5/8”
60
ATB (Alternating Top Bevel)
$64.62
LU91-12R
12”
1”
72
ATB (Alternating Top Bevel)
$85.03
Storage
Freud® Plexiglass/Plastics
Price
E
This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish
without melting the edge. By combining micrograin carbide tips with a specially modified triple
chip grind these blades give a clean, smooth cut producing less heat and keeping the cut edge
crisp. Cuts best from 1/4” to 1-5/8”. Imported.
E
Part #
LU94-10R
Diameter
Arbor
Kerf
Teeth
Tooth Type
Plate
Hook Angle
10”
5/8”
0.11
80
MTCG
.087”
−3º
Freud® LU87 Thin Kerf Rip
Price
$95.64
F
Put this on your saw, and it will glide through tough woods as if it suddenly had a larger motor!
Thin kerf technology reduces power requirements while yielding a very fine finish. A 10” has
alternate top bevel grind, 20º hook, .094” kerf, .071” plate. An 8” has 20º hook, .087” kerf, .063”
plate. Imported.
Index
Part #
F
113
Diameter
Arbor
Teeth
Tooth Type
LU87-08R
8”
5/8”
22
ATB (Alternating Top Bevel)
$45.27
LU87-10R
10”
5/8”
24
ATB (Alternating Top Bevel)
$50.89
Pricing is subject to change at any time due to market fluctuations.
Price
