McFeely's 2024 Catalog - Catalog - Page 108
Fasteners
PLUG CUTTERS
A
Make-it-Snappy® Hex-Shank Bit Adapters
A
Convert drill bits to quick change
Start using the quick-change countersink system, and you’ll wish your drill bits were quick
change too. With these innovative adapters, they will be. A spring steel collet in each adapter
securely grips the bit when the nut is tightened. You can use a range of drill sizes in each
adapter. This is important if you use letter, number, or metric series drill bits. Most important,
if you happen to break a bit (it can happen), just loosen the collet, insert the good half, and
continue working! Sold individually, the adapters do not include the drill bits – purchase
separately. Set of seven includes standard point, high-speed steel drill bits sizes: 1/16”, 3/32”,
1/8”, 5/32”, 3/16”, 7/32” and 1/4”.
Tools
Part #
Description
Price
Individual
Tool Accessories
Part #
Cabinet Mfg
Hardware
Note: Bits are not included.
Fractional Size
Number Sizes
Metric Sizes
MS-2004
1/16 in.
52−54
1.4mm-1.6mm
$5.49
MS-2005
5/64 in.
45−51
1.7mm−2.0mm
$5.49
MS-2006
3/32 in.
40−44
2.1mm−2.4mm
$5.49
MS-2007
7/64 in.
33−39
2.5mm−2.8mm
$5.49
MS-2008
1/8 in.
30−32
2.9mm-3.2mm
$5.49
MS-2009
9/64 in.
27−29
3.3mm−3.6mm
$5.49
MS-2010
5/32 in.
20−26
3.7mm−4.0mm
$5.49
MS-2011
11/64 in.
16−19
4.1mm−4.4mm
$5.49
MS-2012
3/16 in.
11−15
4.5mm−4.8mm
$5.49
MS-2013
13/64 in.
5−10
4.9mm−5.2mm
$5.99
MS-2014
7/32 in.
2−4
5.3mm−5.6mm
$5.99
MS-2015
15/64 in.
1−B
5.7mm−6.0mm
$5.99
MS-2016
1/4 in.
C−E
6.1mm−6.4mm
$6.49
MS-2018
9/32 in.
N/A
.268”−.283”
$6.49
MS-2020
5/16 in.
N/A
.299”-.314”
$7.99
MS-2024
3/8 in.
N/A
.362”-.377”
$7.99
Set
MS-0020
7-Piece Hex-Shank Adapter Set
Make-it-Snappy® Plug Cutters
$36.34
B
Tapered plugs have an almost invisible fit
Safety
How often have you carefully matched the grain of the plugs you cut, only to find that
the hole is a fraction oversize so that the glue line makes each plug look like a miniature
bulls-eye? Snappy Plug cutters are tapered so that they form a tight fit. For best results,
always bore to the maximum depth of the cutter. Once you drill the plug, simply pop it out
with a screwdriver, then insert the chamfered end in the hole. Tap it with a hammer. Trim
the remaining plug flush to the surface. Recommended drill speed is 400 – 1,000 rpm. A
drill press gives best results. Three-piece set includes 1/4”, 3/8” and 1/2” plug cutters. All plug
cutters have 1/4” quick-change shanks, except the 3/4” and 1” diameter which have 7/16” hex
shanks.
Part #
B
Cut Depth
Largest
Diameter
Smallest
Diameter
Price
MS-0316
7/16”
1/4”
0.255”−0.260”
0.245”
MS-0320
1/2”
5/16”
0.317”−0.322”
0.307”
$12.82
3/8”
0.380”−0.385”
0.370”
$13.89
7/16”
0.442”−0.447”
0.432”
$14.96
1/2”
0.505”−0.510”
0.495”
$16.03
MS-0324
MS-0328
9/16”
MS-0332
MS-0340
Storage
Nominal
Diameter
$12.28
5/8”
0.630”−0.635”
0.620”
$18.70
MS-0348
3/4”
3/4”
0.755”−0.760”
0.745”
$26.71
MS-0364
7/8”
1”
1.005”−1.010”
0.995”
$33.15
Set
Part #
Description
3-Piece Set (1/4”, 3/8”, 1/2”)
Index
MS-3300
107
Pricing is subject to change at any time due to market fluctuations.
Price
$37.47
